T32 Cyc™

T32 Cyc™ | ROBE lighting

T32 Cyc™

Are your productions being spoilt by poor cyclorama lighting? Are they not bright enough? Don‘t reach high enough? Are they poor-performing adaptations of other luminaires? It‘s time to change your cyclorama lighting from an eyesore into an eye stunner!

Read More...

Light source

16x 40W MSL™ RGBBAL LED multichips

Light output

up to 17.565 lm, Cpulse™ special flicker free management for HD and UHD cameras, ready for 8K and 16K

Field Angle

Asymmetrical field angle 85° x 45°, Opti-6™ - A 6:1 height-to-distance ratio

Effects

VertiSpot™ - Unique, motorised vertical crossover point control for superior blending and vertical output variance (patented)

Innovations
Cpulse™ - Pulse Width Modulation Control
Cpulse™ - Pulse Width Modulation Control

Cpulse™ is a PWM (Pulse Width Modulation) control system for luminaires that allows you to select and fine-tune the LED driving frequency to ensure no flicker will be visible on any camera system.

MAPS™ - Motionless Absolute Positioning System
MAPS™ - Motionless Absolute Positioning System

Pre-use pan and tilt calibration movement of a fixture can be distracting and sometimes difficult to achieve.

BARS™ - Brake Attribute Retention System
BARS™ - Brake Attribute Retention System

To lock motorised features such as pan, tilt, focus and zoom in position, we have BARS™ – Robes revolutionary patented Brake Attribute Retention System.

L3™ - Low Light Linearity System
L3™ - Low Light Linearity System

The L3™ Low Light Linearity System produces imperceptible, ultra-smooth fades to black.

REAP™ - Robe Ethernet Access Portal
REAP™ - Robe Ethernet Access Portal

The Robe Ethernet Access Portal allows to access internal data from a networked fixture, viewed as a web page, addressable via the fixtures network IP.

GDTF – General Device Type Format
GDTF – General Device Type Format

The General Device Type Format creates a unified definition for exchange of data for the operation of intelligent luminaries, such as moving lights. The file format is human readable and developed using open source formats.

QVGA Robe Touch Screen Display System
QVGA Robe Touch Screen Display System

The QVGA Robe touch screen display gives full access to all fixture setup and diagnostic functions and is very intuitive to navigate.

airLOC™
airLOC™

Our latest AirLOC™ (Less Optical Cleaning) technology greatly reduces the level of airborne particles drawn over the optical elements.

Epass™
Epass™

Robe lighting’s Epass™ provides Ethernet in/out connections with a pass-through switch that sustains Ethernet integrity when the fixture has no power to automatically maintain network connectivity.

DataSwatch™ - inbuilt virtual colour library
DataSwatch™ - inbuilt virtual colour library

The DataSwatch™ inbuilt virtual colour library for Robe LED fixtures consists of up to 237 pre-programmed and calibrated colours and tones, allowing for rapid and accurate programming.

RLCT™ - Robe lens coating technology
RLCT™ - Robe lens coating technology

Just like with spectacles, our lens coating technology protects soft plastic lenses against surface scratches, that can even occur during cleaning when scrubbed repeatedly. Anti-static properties prevent dust build-up on the lenses, thus extending the period between maintenance cleaning.

Tungsten Emulation
Tungsten Emulation

When selected, the luminaire will mimic the colour temperature of a tungsten lamp as you lower the output to produce that classic warm glow.

+ - Green Correction
+ - Green Correction

Robe has included a dedicated +/- green control channel in fixtures that feature our MSL™ specific white TE™ source fixtures. This allows you to make the smallest changes of green content compared to the fixed levels produced by the specific filters on white source fixtures.

Technical Specification

ROBE Lighting uses cookies. We use cookies to personalise content and ads and to analyse our traffic. Please see “More about cookies” to learn more about how they are used on our website. Click “I agree” to activate them or “Close and just use cookies not requiring consent” if you do not want them. You can change your settings on "Cookies" in the footer at any time.