Our unique T11 Profile™ delivers both superb performance and total generic flexibility! Read More...
Building on the superb MSL™ (Multi-Spectral Light) colour concept, and innovative TE™ technology, our T11 Profile™ maintains the exceptional colour finesse of the phenomenally successful T series. With a fast, interchangeable front lens system, the T11 Profile™ offers absolute, cost-effective flexibility while delivering superb optical quality.
With the MSL-TE™ 350W LED Engine generating over 12.000 lm from the Profile fixture and all the advantages of cost, exchange or replacement, this LED technology provides identical colour characteristics, responses, and control of T series luminaires, giving absolute colour consistency across your Robe lighting installation.
High-definition optics deliver precise projection, beam control, and an extreme, wide-ranging 10:1 ratio 5-50° zoom range, from its single, integral lens tube, without additional lens tubes or optical variants.
A virtually controlled CCT range of 2.700K to 8.000K, calibrated whites, and tungsten emulation gives precise control, while we ensure skin tones are perfectly rendered due to T11’s high TLCI and TM30-18 ratings and exceptional CRI of 95.
Our innovative manual shuttering system is both accurate and easy to use. Integral to the fixture is a manual 1° MagFrost™ for instant softening, with an optional 5° frost available.
The unobtrusive T11 is specifically designed to operate in any noise-sensitive environment, with TV studio use enhanced via Cpulse™ flicker-free software and a dedicated plus and minus green channel control.
To increase gobo capacity from the single breakup gobo and holder included with the fixture, an optional drop-in module with two rotating and three static gobos using our standard slot and lock system is available. Furthermore, a motorised iris is included. Easy to install, this allows dual projection of both static and rotating gobos to produce dynamic effects.
Utilizing the rapid-change front lens system, the T11 Profile™ quickly transforms into a Fresnel or PC fixture for total luminaire flexibility without the cost of separate generic purchases.
T11 The three into one generic solution!
TE™ 350W Multi-Spectral LED engine
12.000 lm, CRI 95+, + - Green Correction Function, Cpulse™ special flicker free management for HD and UHD cameras, ready for 8K and 16K
manual 5°- 50°
manual Framing shutters, Frost, Static gobo, optional drop-in module with motorised Iris, Static and Rotating gobo
Light source type: MSL-TE™ 350W LED Engine
LED Engine output: 16.700 lm
LED life expectancy: min. 40.000 hours
Colour rendition:
CRI: 95, CRI R9: 96, TM30-18 Rf: 92, TM30-18 Rg: 106, TLCI: 91
Typical lumen maintenance: L70/B50 @ 40.000 hours
Light source warranty: 4 years or 20.000 hours
Robe’s proprietary optical design
Profile zoom lens system
High-efficiency manual zoom: High definition optics: ratio 10:1, zoom range 5°- 50°
Fixture total lumen output
12.000 lm (integrating sphere)
9.500 lm (goniophotometer)
Optional PC and Fresnel zoom lens systems
Colour mixing: CMY/RGB or RGBAL
White light: Variable CCT 2.700K - 8.000K
DataSwatch™ filters: pre-programmed 237 colours and tones including most used whites 2.700K, 3.200K, 4.200K, 5.600K
Tungsten lamp effect: 750W, 1.000W, 1.200W, 2.000W, 2.500W lamp emulation for whites from 2.700K to 4200K (red shift and thermal delay)
+ - Green correction function
Adjustable CRI: from 80 to 95+
Manual framing shutters: framing shutters module with 4 individually positionable blades
Optional drop-in gobo module: motorised iris, 2 rotating and 3 static gobos
MagFrost™ - magnetic paddle fast change system providing exchangeable frost containing as standard a light 1° for instant softening of the framing shutters or projected gobo
Manual zoom and focus
Electronic strobe effect with variable speed up to 20 Hz, pre-programmed random strobe & pulse effects
High resolution electronic dimming: 0 - 100%
L3™ - (Low Light Linearity) Imperceptible 18 bit dimming for ultra smooth fade to black
Dimmer profile selection: Linear, Square law
Cpulse™ special flicker-free management for HD and UHD cameras, ready for 8K and 16K
Extremely quiet operation suitable for all types of production in Theatre and TV
Setting & Addressing: two-row LCD display & 4 control buttons
Protocols:
USITT DMX-512, RDM
ArtNet, MA Net, MA Net2, sACN
REAP™ - Robe Ethernet Access Portal
Wireless CRMX™ technology from Lumen Radio - on request
Epass™: Ethernet pass through switch which sustains Ethernet integrity, when the fixture has no power, to automatically maintain network connectivity - on request
DMX Protocol modes: 8
Control channels: 18, 9, 22, 6, 1, 24, 13, 28
Variable CCT: 8 bit
+ - Green correction: 8 bit
Colour mixing: 8 or 16 bit (internal 18 bit)
Gobo indexing & rotation: 8 or 16 bit
Iris: 8 or 16 bit
Dimmer: 8 or 16 bit (internal 18 bit)
2x rotating glass gobos: (with optional drop-in gobo module)
Outside diameter: 26.8 mm
Image diameter: 23.5 mm
Thickness: 1.1 mm
Max. thickness: 4.0 mm
High temperature borofloat or better glass
Slot & lock system for easy replacement of gobo
1x static glass gobo: (3x with optional drop-in gobo module)
Outside diameter: 26.8 mm
Image diameter: 23.5 mm
Thickness: 1.1 mm
Max. thickness: 4.0 mm
High temperature borofloat or better glass
Gobo holder R size: slot & lock system for easy replacement of gobos
Maximum ambient temperature: 45 °C (113 °F)
Maximum surface temperature: 90 °C (194 °F)
Minimum operating temperature: -5 °C (23 °F)
Total heat dissipation: max. 1125 BTU/h (calculated)
Power supply: Electronic auto-ranging
Input voltage range: 100-240 V, 50/60 Hz
Power consumption: Max. 420 W
Power connector in/out: Neutrik powerCON TRUE1 in/out
DMX and RDM data in/out: Locking 5-pin XLR
Ethernet port in/out: RJ45 for Embedded Epass™ switch 10/100 Mbps - on request
CE Compliant
cETLus Compliant
Height: 493 mm (19.4")
Width: 385 mm (15.15")
Depth: 653 mm (25.7")
Weight:
15.7 kg (34.6 lbs)
16.9 kg (37.3 lbs) with optional drop-in gobo module
Ingress protection rating: IP20
Mounting horizontally or vertically via mounting yoke
Mounting points: M12 bolt
Safety cable attachment point
User Manual
Gel frame adaptor
Gobo Holder R size with gobo: 10980655
Doughty Trigger Clamp
Wireless DMX external module: 10980127
Safety wire 36 kg: 99011963
T11 Fresnel lens module: 10980644
T11 PC lens module: 10980645
Pole operated yoke: 10980667
Robin T11 MFS handles: 10080338
Drop-in manual Iris: 10980677
Frost 0.5° (exchange) assembled: 10980583
Frost 3.5° (exchange) assembled: 10980668 Frost 5° (exchange) assembled: 10980573
Frost 10° (exchange) assembled: 10980497
Frost 20° (exchange) assembled: 10980574
Frost 30° (exchange) assembled: 10980584
Drop-in gobo and iris module: 10980649
Hot-spot lens: 10980666
Gel frame: 10980372
Barndoor module: 10980349
Top hat
Mains Cable powerCON TRUE1 In/Schuko, 2m, Indoor: 13052405
Mains Cable powerCON TRUE1 In/US, 2m, Indoor: 13052406
Daisy Chain powerCON TRUE1 In/Out, EU, 2m, Indoor: 13052439
Mains Cable powerCON TRUE1 In/CEE 16A, 2m, Indoor: 13052445
Mains Cable powerCON TRUE1 In/Open ended, 2m, Indoor: 13052407
Daisy Chain powerCON TRUE1 In/Out, US, 2m, Indoor: 13052440
Daisy Chain powerCON TRUE1 In/Out, EU, 5m, Indoor: 13052444
Single Top Loader Case: 10120279
Single Top Loader Trolley case: 10120281 Dual Top Loader Case: 10120282
Foam Shell: 20020425
T11 Profile™ is a Trademark of Robe lighting s. r. o.
T11 Profile™ is patented by Robe lighting s. r. o. and is protected by one or more pending or issued patents
Czech Republic-based moving and LED lighting manufacturer Robe lighting s.r.o. rocked back to major live exhibition shows with a dazzling new live production, CUETE & The Beast, created exclusively for the Prolight+Sound 2022 expo and presented last week in Frankfurt, Germany.
Robe hits the ground running at Prolight 2022, launching five brand new products – PAINTE™, TetraX™, iBeam 250™, Spikie+® and the Anolis Calumma™ … as well as showcasing five innovative products launched in 2021 – FORTE™, CUETE™, LEDBeam 350™, T2 and T11 – which will be presented physically following their digital launches last year!
This newsletter is summarizing latest release of software updates, technical documents and certifications (Declarations of conformity for CE and UK). Read on for further information.
Here is one last Technical Newsletter for 2021 with the list of notable software changes. One of the most important updates is a new extended editing capability of Position presets in RoboSpot. Read on for more details.
All rights reserved. Created by Appio
ROBE Lighting uses cookies. We use cookies to personalise content and ads and to analyse our traffic. Please see “More about cookies” to learn more about how they are used on our website. Click “I agree” to activate them or “Close and just use cookies not requiring consent” if you do not want them. You can change your settings on "Cookies" in the footer at any time.