Robe’s proprietary optical design

High - efficiency zoom optical system, ratio 7:1

Zoom range: 8° - 60°

Fixture total lumen output: 10.320 lm

Output lens diameter: 156 mm

Factory calibrated whites and colours via the new RCC™ (Robe Colour Calibration) system, automatic or on-call self-re-calibration of the LED engine without the use of any external tool (Patent pending)

Colour mixing: CMY/RGB or RGBAL

White light: Variable CCT 2.700K - 8.000K

DataSwatch™ filters: pre-programmed 237 colours and tones including most used whites 2.700K, 3.200K, 4.200K, 5.600K and 8.000K

Tungsten lamp effect: 750W, 1.000W, 1.200W, 2.000W, 2.500W lamp emulation for whites from 2.700K to 4200K (red shift and thermal delay)

+ - Green correction function

Adjustable CRI from 80 to 95+

Internal barndoors: individual position control of 4 “doors”, +/- 90° module rotation (Patented)

Scrim: Graduated filter position control, +/- 180° module rotation (Patented)

Frost: light 5° + medium 10°

Motorized zoom

Edge colour correction

Electronic strobe effect with variable speed up to 20 Hz

Pre-programmed random strobe & pulse effects

L3™ - (Low Light Linearity) Imperceptible 18 bit dimming for ultra smooth fade to black

Extremely quiet operation suitable for all types of production in Theatre and TV

Cpulse™ special flicker-free management for HD and UHD cameras, ready for 8K and 16K

AirLOC™ (Less Optical Cleaning) technology greatly reduces the level of airborne particles drawn over the optical elements. This increases the overall performance, light quality and time between routine cleaning and maintenance.

Setting & Addressing: ROBE Navigation System 2 (RNS2)

Display: QVGA Robe touch screen with battery backup, gravitation sensor for auto screen positioning, operation memory service log with RTC, stand-alone operation with 3 editable programs (each up to 100 steps), built-in analyser for easy fault finding

Protocols: USITT DMX-512, RDM, ArtNet, MA Net, MA Net2, sACN

REAP™ - Robe Ethernet Access Portal

Wireless CRMX™ technology from Lumen Radio - on request

Epass™: Ethernet pass through switch which sustains Ethernet integrity, when the fixture has no power, to automatically maintain network connectivity

DMX Protocol modes: 3

Control channels: 35, 24, 39

Pan/Tilt resolution: 16 bit

Colour mixing: 8 or 16 bit (internal 18 bit)

Variable CCT: 8 bit

Internal barndoor module movement & rotation: 8 bit

Frost: 8 bit

Zoom: 8 or 16 bit

Edge colour correction: 8 bit

Dimmer: 8 or 16 bit (internal 18 bit)

Pan movement: 540°

Tilt movement: 265°

Movement control: Standard and Speed

Controllable speed of Pan/Tilt movement

Automatic Pan/Tilt position correction

EMS™: Electronic Motion Stabilizer system for Pan & Tilt reducing beam deviation caused by truss movement or vibration (Patented)

Blades: 4 blades, each with separate movement control

Rotation: +/- 90° module rotation

Maximum ambient temperature: 45°C (113°F)

Maximum surface temperature: 70°C (158°F)

Minimum operating temperature: -5°C (23°F)

Power supply: Electronic auto-ranging

Input voltage range: 100-240 V, 50/60 Hz

Power consumption: maximum 750 W at 230 V / 50 Hz (all LEDs On)

Typical power consumption: 160 - 215 W (one colour = full)

Power in connector: Neutrik powerCON TRUE1

DMX and RDM data in/out: Locking 3-pin & 5-pin XLR

Ethernet port in: RJ45

Ethernet port in/out: RJ45 (instead of 3-pin XLR) for Embedded Epass™ switch 10/100 Mbps - on request

CE Compliant

cETLus Compliant

Height: 712 mm (28") - head in vertical position

Width: 400 mm (15.7")

Depth: 258 mm (10.2") - head in vertical position

Weight: 22.6 kg (49.8 lbs)

Ingress protection rating: IP20

Mounting positions: Horizontally or vertically

Universal operating position

Mounting points: 2 pairs of 1/4-turn locking points

2x Omega adaptors with 1/4-turn quick locks

Safety cable attachment point

Pan and Tilt transport locks

User Manual

Omega Adaptor CL-regular 2 pcs : 10980033

Power cord including powerCON TRUE1 In connector

Gel frame adaptor

Top hat: 10980535

Gel frame: 10980452

Module of PC lens for T1 Fresnel: 10980449

Doughty Trigger Clamp: 17030386

Safety wire 36 kg: 99011963

Single Top Loader Case: 10120244-03

Dual Top Loader Case: 10120245-03

Foam Shell: 20020340-01

T1 Fresnel™ is a Trademark of Robe lighting s. r. o.

T1 Fresnel™ is patented by Robe lighting s. r. o. and is protected by one or more pending or issued patents