The Robe Spiider® – Our super bright LED WashBeam luminaire has truly set the benchmark in performance! Using 18 x 40 Watt and 1 x 60 Watt LEDs, combined with a highly efficient 12,5:1 zoom optical system, ranging from tight 4° Beam to wide 50° Wash, makes the Spiider® the leader in its class. Beautiful convergence of hard edge in-air effects, punchy beams and smooth, homogenized rich colour washes are all encapsulated in the unique Spiider®!

The Spiider® product family truly sets itself apart. With the eye-catching Robe patented MCFE™ – Multi-Coloured Flower Effects – emitting sharp, multi-coloured spikes of light, including variable speed and rotation direction control to further increase the projection of charismatic in-air animations. Dynamic video effects are easily achieved by mapping individual pixels and controlled by DMX desk or media servers via sACN with internal HTP merging, DMX or by Kling-Net protocol. Equipped with Robe's innovative lens coating technology, the lenses keep bright and clear, with no scratches or marks, providing higher light output for longer intervals between cleaning.

Perfect colour and dimming control are available via RGBW and CMY colour mixing modes; our 18 Bit L3™ Low Light Linearity dimming software for imperceptible fades to black; variable CCT of 2.700K – 8.000K; tungsten emulation simulating the red shift and thermal delay of tungsten lamps for whites from 2.700K – 4.200K; and our DataSwatch™ 237 pre-programmed colour library.

Light source

1x 60W RGBW and 18 x 40W RGBW LED multichips

Light output

13.700 lm, 50.100 lx @ 5m

Zoom range

4° - 50°

Effects

pixel control, MCFE™ - Multi-Coloured Flower Effects (patented), virtual colour wheel, tungsten lamp effect, preprogrammed pixel effects

Innovations

DataSwatch™ - inbuilt virtual colour library

The DataSwatch™ inbuilt virtual colour library for Robe LED fixtures consists of up to 237 pre-programmed and calibrated colours and tones, allowing for rapid and accurate programming.

MCFE™ - Multi Coloured Flower Effect

The Robe patented MCFE™ – Multi-Coloured Flower Effect – creates sharp, multi-coloured spikes of light, that are fully rotatable in both directions, at variable speeds.

EMS™ - Electronic Motion Stabiliser

The Robe Electronic Motion Stabiliser is a technology for exact Pan and Tilt movements and reduces vibrations from audio outputs, truss movement and sprung or suspended floors.

RLCT™ - Robe lens coating technology

Just like with spectacles, our lens coating technology protects soft plastic lenses against surface scratches, that can even occur during cleaning when scrubbed repeatedly. Anti-static properties prevent dust build-up on the lenses, thus extending the period between maintenance cleaning.

L3™ - Low Light Linearity System

The L3™ Low Light Linearity System produces imperceptible, ultra-smooth fades to black.

GDTF – General Device Type Format

The General Device Type Format creates a unified definition for exchange of data for the operation of intelligent luminaries, such as moving lights. The file format is human readable and developed using open source formats.

Tungsten Emulation

When selected, the luminaire will mimic the colour temperature of a tungsten lamp as you lower the output to produce that classic warm glow.

QVGA Robe Touch Screen Display System

The QVGA Robe touch screen display gives full access to all fixture setup and diagnostic functions and is very intuitive to navigate.

FW diffusers for pixelated washers

Robe fixtures homogenise beams really well but, for the ultimate smoothness, most of our pixelated LED wash lights can easily be fitted with a Fresnel Wash (FW) diffusion filter in-between the LED array and the lenses. They can also be ordered pre-installed if desired, as FW versions.

REAP™ - Robe Ethernet Access Portal

The Robe Ethernet Access Portal allows to access internal data from a networked fixture, viewed as a web page, addressable via the fixtures network IP.

Product Video

Accessories

Technical Specification

Expand AllDownload PDFCollapse All

Source

Light source type: 1x 60W RGBW and 18x 40W RGBW LED multichips

LED life expectancy: min. 50.000 hours

Typical lumen maintenance: L70/B50 @ 50.000 hours

Optical system

Dynamic Effects and Features

Colour mixing mode RGBW or CMY

Individual control of each RGBW pixel

Variable CTO: 2.700K - 8.000K

Virtual Colour Wheel: with 66 preset swatches

Tungsten lamp effect at whites: 750W, 1.000W, 1.200W, 2.000W, 2.500W lamp emulation for whites from 2.700K to 4.200K (red shift and thermal delay)

Colour rainbow effect with variable speed

Pre-programmed pixel effects with colour, dimming and strobe chases, waves and pulses at variable speed and direction

MCFE™ - Multi-Coloured Flower Effects – creating spectacular multicolour beam effects in the air rotating in both directions at variable speed (patented)

Strobe effect: variable speed (max. 20 flashes per second)

Pre-programmed random strobe & pulse effects

High resolution electronic dimming: 0 - 100%

L3™ - (Low Light Linearity) Imperceptible 18 bit dimming for ultra smooth fade to black

Control and programming

Setting & Addressing: ROBE Navigation System 2 (RNS2)

Display: QVGA Robe touch screen with battery backup, gravitation sensor for auto screen positioning, operation memory service log with RTC, stand-alone operation with 3 editable programs (each up to 100 steps), built-in analyser for easy fault finding

Protocols: USITT DMX-512, RDM, Art-Net, MA Net, MA Net2, sACN, Kling-Net

Wireless CRMX™ technology from Lumen Radio - on request

DMX Protocol modes: 10

Control channels: 49, 27, 33, 90, 27, 47, 91, 110, 104, 123

Pan/Tilt resolution: 16 bit

R,G,B,W colour mixing: 8 or 16 bit (internal 18 bit)

Zoom: 8 bit

Dimmer: 8 or 16 bit (internal 18 bit)

Movement

Thermal specification

Electrical specification and connections

Approvals

Mechanical specification

Rigging

Included items

Optional accessories

Diffusion filter 2°: 10980416

Clear lens cover: 10980607

EggCrate: 10980317

Doughty Trigger Clamp: 17030386

Safety wire 36 kg: 99011963

Single Omega Bracket for one clamp - black: 10980100

Single Omega Bracket for one clamp - white: 10980129

Single Omega Bracket for one clamp - neutral: 10980113

Single Top Loader Case: 10120195-01

Dual Top Loader Case: 10120207

Quad Top Loader Case: 10120208

Foam Shell: 20020290

Legal

Inspiration

Related News

31.8.2023

Robe Makes a Splash with Dubioza Kolektiv

A largely Robe lighting rig was specified and used by leading Slovenian lighting designer Crt Birsa from design studio Blackout for Dubioza Kolektiv’s closing set of the 2023 Velenje Summer Splash open air festival, staged at the picturesque lakeshore location in Velenje, Slovenia.

11.8.2023

Marillion Convention in Berlin

UK-based Rock band Marillion has built up a formidable and near cult-like following over a career spanning five decades that has spawned 20 studio albums plus a string of top 40 hits since their formation in 1979. For the last 21 years, they have staged biennial 2 and 3-day summer convention events for fans, which include special live performances plus additional Marillion world activities.

1.8.2023

Robe for Offer Nissim at Pride Tel Aviv

Elad Cohen is a lighting designer based in Tel Aviv, Israel who has a huge zest for music, lights, and creative activities. Since the early days of his career as a club lighting operator, he has always been a big user and fan of Robe moving lights, and when one of his regular clients – renowned DJ Offer Nissim – recently headlined the Tel Aviv Pride Festival, he specified a large Robe rig including MegaPointes, Spiiders and ESPRITES.

25.7.2023

First Robe FOOTSIES in the US on CMA Fest

Lighting designer Mike Swinford of UpLate Design loves new tech as much as he loves the chance to be the first to use it, so he was delighted when everything aligned for rental company Fuse to invest in the first Robe FOOTSIE luminaires to arrive in the USA … which he utilized as a key lighting element for the 2023 CMA Fest.

Partner's websites:

We are proud sponsors of:

We are member of:

ROBE Lighting uses cookies. We use cookies to personalise content and ads and to analyse our traffic. Please see “More about cookies” to learn more about how they are used on our website. Click “I agree” to activate them or “Close and just use cookies not requiring consent” if you do not want them. You can change your settings on "Cookies" in the footer at any time.

More about cookies

Close and just use cookies not requiring consent

Spiider®