Strobe™ / Strobe Lite™

Power is everything! The Strobe from Robe could not be anything but THE brightest, best value, most sophisticated strobe-blinder effects unit on the market.

Light source

 120x High Power White LED chips

Light output

5.600 lux @ 5 m / 48.500 lm

Effects

12 zones control, continous full power operation, strobe effects

| ROBE lighting

Ultimately controllable, configurable and arrayable. Super fast bursts of high powered pulses can be adjusted in frequency, duration and intensity, optically harnessed from the 120x High Power White LED chips. Easy to rig individually or in multiples and easy to program, using direct segment control or the pre-defined macros. Fitted with the standard Robe RNS touch screen system with DMX, RDM, Art-Net, MA Net and sACN protocols. Optional wireless DMX module.

Technical Specification

Source

Light Source Type: 120x High Power White LED chips

CCT: 6.000 K

LED Life Expectancy: Minimum 60 000 hours

Typical Lumen Maintenance: 70% @ 60 000 hours

Optical system and effects

High efficient component optics

Beam Angle: 32° (at 1/2 beam), 60° (at 1/10 beam)

Individual control: 12 segments (3 lines and 4 columns)

Strobe duration: 13-860 ms

Strobe rate: 0.3-30 Hz

Blinder effect: Continuous full power operation with high resolution dimmer

High Resolution Dimmer (Internal 18 bit): 8 or 16 bit

Strobe effects: Ramp up, ramp down, ramp up-down, random flash, single flash

Control and programming

Setting & Addressing: Robe Navigation System 2 (RNS2)

Protocols: USITT DMX-512, RDM, ArtNet, MA Net, MA Net2, sACN

Optional wireless version available: CRMX™ technology from Lumen Radio

Control Channels: 8, 20, 3, 4

Protocol Modes: 4

Programs: 3 editable programs up to 88 steps

Stand-alone operation

Display: QVGA Robe touch screen with battery backup, gravitation sensor for auto screen positioning, operation memory service log with RTC Ethernet Port: Art-Net protocol, ready for ACN

Data in/out: Locking 5-pin XLR

Built in analyser for easy fault finding

Thermal specification

Maximum Ambient Temperature: 45° C (113° F)

Maximum Housing Temperature: 75° C (167°C)

Movement

Tilt adjustment: Manual

Electrical specification

Electronic auto-ranging

Input Voltage Range: 100-240 V, 50/60 Hz

Power Consumption: 660 W

Power Connector: Neutrik PowerCon

Approvals

CE Compliant

cETLus Compliant

Mechanical specification

Height (U-holder vertically): 350 mm (13.8")

Width: 315 mm (12.4")

Depth: 300 mm (11,8")

Weight: 15.3 kg (33.7 lbs)

Ingress protection: IP22

Rigging

Mounting Points: 1 pair of 1-turn locks

Multipoint segment locking for big trusses instalations

Omega Brackets: 2x Omega bracket with 1-turn quick locks

Optional accessories

Optional: floor stand, barndoor, frame adaptor, gel frame, stacker