iSpiider®

Unlike other spiders, our new IP65 rated iSpiider®, with its highly advanced protective design, is perfectly happy to play in the rain!

Light source

1x 60W RGBW and 18x 40W RGBW LED multichips

Light output

13.100 lm, 49.000 lx @ 5m

Zoom range

4° - 50°

Effects

pixel control, MCFE™ - Multi-Coloured Flower Effects (patented), virtual colour wheel, tungsten lamp effect, preprogrammed pixel effects

| ROBE lighting

Ideally suited for festivals, concerts and outdoor events, or any scenario needing to deal with inclement or unpredictable weather, the iSpiider® is a bright, high-performance rated WashBeam luminaire, retaining all the favourite features of its phenomenally successful indoor relative, the Spiider®.

Designed, developed, and manufactured, to be sealed against water and particle ingress, thereby strictly adhering to their IP65 rating, you can be confident of both its protection and performance.

Their aluminium housing gives a dust-free environment for the optics, eliminating the need for frequent cleaning and routine maintenance.

By including NFC (Near-Field Communication) technology, you can access setup, diagnostic and performance features, even when the fixture is not powered, directly from your mobile device using the Robe Com app.

iSpiider® uses the same 18 x 40-Watt, and 1 x 60-Watt LED source as the original, with the identical 12.5:1 zoom optical system, giving the same, tight 4° Beam to wide 50° Wash.

The unique Robe patented MCFE™ - Multi-Coloured Flower Effect, driven by the center 60W RGBW LED multichip, produces sharp, multicoloured spikes of light, rotating in both directions at variable speed, adding visual impact to any show.

All control protocols are present, with dynamic video effects achieved by mapping individual pixels, controlled by DMX control desks, media servers via sACN with internal HTP merging, or Kling-Net.

Designed to be used indoors or out, we make fixture swap with the original Spiider® easy, as the DMX control channels, operating speeds, and feature set of both luminaires are identical.

iSeries – Robe reliability in all weathers.

Technical Specification

Source

Light source type: 1x 60W RGBW and 18x 40W RGBW LED multichips

LED life expectancy: min. 50.000 hours

Typical lumen maintenance: L70/B50 @ 50.000 hours

Optical system

Robe’s proprietary optical design

High-efficiency zoom optical system, ratio 12,5:1

Zoom range: 4° - 50°

Fixture total lumen output:

  • 13.100 lm (integrating sphere)

  • 10.500 lm (goniophotometer)

Illuminance: 49.000 lx @ 5 m

Innovative lens coating technology (Patent pending)

Dynamic Effects and Features

Colour mixing mode RGBW or CMY

Individual control of each RGBW pixel

White light: Variable CCT 2.700K - 8.000K

DataSwatch™ filters: pre-programmed 66 colours and tones including most used whites 2.700K, 3.200K, 4.200K, 5.600K and 8.000K

Tungsten lamp effect: 750W, 1.000W, 1.200W, 2.000W, 2.500W lamp emulation for whites from 2.700K to 4.200K (red shift and thermal delay)

Colour rainbow effect with variable speed

MCFE™ - Multi-Coloured Flower Effects – creating spectacular multicolour beam effects in the air rotating in both directions at variable speed (patented)

Pre-programmed pixel effects with colour, dimming and strobe chases, waves and pulses at variable speed and direction

Innovative Flower Effect: rotating in both directions at variable speed (Patented)

Electronic strobe effect with variable speed up to 20 Hz, pre-programmed random strobe & pulse effects

High resolution electronic dimming: 0 - 100%

L3™ - (Low Light Linearity) Imperceptible 18 bit dimming for ultra smooth fade to black

Control and programming

Setting & Addressing: ROBE Navigation System 2 (RNS2)

Display: QVGA Robe screen with battery backup, gravitation sensor for auto screen positioning, operation memory service log with RTC, built-in analyser for easy fault finding, NFC app controller

Protocols: USITT DMX-512, RDM, Art-Net, MA Net, MA Net2, sACN, Kling-Net

Wireless CRMX™ technology from Lumen Radio

Epass™: Ethernet pass through switch which sustains Ethernet integrity, when the fixture has no power, to automatically maintain network connectivity

REAP™ - Robe Ethernet Access Portal

DMX Protocol modes: 10

Control channels: 49, 27, 33, 90, 27, 47, 91, 110, 104, 123

Pan/Tilt resolution: 16 bit

R,G,B,W colour mixing: 8 or 16 bit (internal 18 bit)

Zoom: 8 bit

Dimmer: 8 or 16 bit (internal 18 bit)

Movement

Pan movement: 540°

Tilt movement: 220°

Movement control: Standard and Speed

Controllable speed of Pan/Tilt movement

EMS™: Electronic Motion Stabilizer system for Pan & Tilt reducing beam deviation caused by truss movement or vibration (Patented)

Automatic Pan/Tilt position correction

Thermal specification

Maximum ambient temperature: 45°C (113°F)

Maximum surface temperature: 75°C (167°F)

Minimum operating temperature: -10°C (14°F)

Total heat dissipation: max. 1614 BTU/h (calculated)

Electrical specification and connections

Power supply: Electronic auto-ranging

Input voltage range: 100-240 V, 50/60 Hz

Power consumption: max. 660 W

Power connector in: IP65 Neutrik powerCON TRUE1

DMX and RDM data in/out: IP65 Locking 5-pin XLR connectors

Embedded Ethernet switch 10/100 Mbps: 1 x in / 1 x out

Ethernet port in: 2 x IP65 RJ45 connector

Approvals

CE Compliant

cETLus Compliant (pending)

Mechanical specification

Height:

  • 534 mm (21.0”) – head in vertical position

  • 595 mm (23.4”) – head in horizontal position

Width: 450 mm (17.7”)

Depth: 277 mm (10.9”)

Weight: 24.9 kg (54.9 lbs)

Ingress protection rating: IP65

Rigging

Mounting positions: Horizontally or vertically

Universal operating position

Mounting points: 2 pairs of 1/4-turn locking points

2x Omega adaptors with 1/4-turn quick locks

Safety cable attachment point

Tilt transport lock

Included items

User Manual

Omega Adaptor CL-regular 2 pcs

Power cord including powerCON TRUE1 In connector

Optional accessories

Doughty Trigger Clamp: 17030386

Safety wire 36 kg: 99011963

Single Top Loader Case: 10120277

Dual Top Loader Case: 10120278

Foam Shell: 20020416

Legal

iSpiider® is Registered Trademark of Robe lighting s. r. o.

iSpiider® is patented by Robe lighting s. r. o. and is protected by one or more pending or issued patents