The BMFL WashBeam EV is a special version of a standard and extremely popular BMFL WashBeam fixture, which comes with second rotating gobo wheel (instead of animation wheel), offering in total 12 rotating and indexable gobos. The EV version has been designed for Japanese market, but upon request is now available also for other markets.

The BMFL WashBeam EV will enhance any show with its large beam produced through wide 180 mm front lens. With custom light source designed for Robe it produces an astounding 300.000 lux at 5 metres! Two rotating gobo wheels with carefully selected gobos ensure many combinations of in air animations, but can also produce nice spot-like projections on surfaces. Four fast shutter blades with smooth and precise movement offer individually angled positions within a frame - which itself can rotate through 90 degrees, providing a sharp or soft, precisely repeatable frame for the projected image. Fast movement of the framing system also allows unique in air beam effects. Adding frost filters can enhance the projection by adding smooth touches to the beam‘s edge.

Light source

1700 W OSRAM Lok-it! HTI 1700/PS

Light output

41.000 lm, 300.000 lx @ 5 m, 3.000 lx @ 50 m

Zoom range

5° - 45°

Effects

framing shutters, 2 rotating gobo wheels, interchangeable frost

Innovations

EMS™ - Electronic Motion Stabiliser

The Robe Electronic Motion Stabiliser is a technology for exact Pan and Tilt movements and reduces vibrations from audio outputs, truss movement and sprung or suspended floors.

REAP™ - Robe Ethernet Access Portal

The Robe Ethernet Access Portal allows to access internal data from a networked fixture, viewed as a web page, addressable via the fixtures network IP.

Slot & Lock Gobos

Robe's patented "slot & lock" system allows for easy and fast replacement of both rotatable and indexable gobos.

QVGA Robe Touch Screen Display System

The QVGA Robe touch screen display gives full access to all fixture setup and diagnostic functions and is very intuitive to navigate.

Plano4™ Framing shutters

Robe's patented Plano4™ 4 blade framing shutter module offers absolute beam control with each blade on an individual level with separate movement and rotation control. They are ultra-thin, enabling them all to be focused sharp, without any distortion. They can be easily used in combination with a gobo – and even if you add colour, you will experience no chromatic aberration, also referred to as "Fringing", making our innovative framing shutters really stand out!

Gobos&Colours

Accessories

Technical Specification

Expand AllDownload PDFCollapse All

Source

Light source type: Compact short-arc metal halide lamp

Base: PGJX28

Approved model: OSRAM Lok-it! HTI 1700/PS

Lifetime: 750 hours @ 1700 W / 1500 W / Quiet mode

CRI: 92+

Colour temperature: 6.000K

Control: Automatic and remote on/off

Ballast: Electronic

Optical system

Dynamic Effects and Features

Cyan: 0 - 100%

Magenta: 0 - 100%

Yellow: 0 - 100%

Variable CTO: 2.700K - 6.000K

Colour Wheel 1: 6 fixed dichroic colours: deep red, deep blue, orange, green, magenta, congo blue + white

Colour Wheel 2: 6 replaceable "SLOT&LOCK" dichroic colours: pink, lavender, laser green, 9000 K CTB, minus half and minus green + white

Framing shutters : 4 individually positionable blades plus rotation of the complete frame system +-45°

Rotating gobo wheel 1: 6 rotating, indexable, replaceable "SLOT&LOCK" glass gobos + open

Rotating gobo wheel 2: 6 rotating, indexable, replaceable "SLOT&LOCK" glass gobos + open

Iris: Motorized, stepless, pulse effects up to 3 Hz

Frost: Variable Light, Medium plus repleceable Heavy (two another frosts included)

Motorized zoom and focus

Shutter: Separate dual blade system, variable strobe effect up to 10 Hz, full black out

Dimmer: Optimized dual blade system for exceptional smooth dimming

Control and programming

Setting & Addressing: ROBE Navigation System 2 (RNS2)

Display: QVGA Robe touch screen with battery backup, gravitation sensor for auto screen positioning, operation memory service log with RTC, stand-alone operation with 3 editable programs (each up to 100 steps), built-in analyser for easy fault finding

Protocols: USITT DMX-512, RDM, ArtNet, MA Net, MA Net2, sACN

REAP™ - Robe Ethernet Access Portal

Wireless CRMX™ technology from Lumen Radio - on request

DMX Protocol modes: 2

Control channels: 48, 40

Pan/Tilt resolution: 16 bit

CMY & CTO: 8 bit

Colour wheel positioning: 8 or 16 bit

Framing shutters module movement & rotation: 8 bit

Rotating gobo wheel positioning: 8 bit

Gobo indexing & rotation: 8 or 16 bit

Iris: 8 or 16 bit

Frost: 8 bit

Zoom: 8 or 16 bit

Focus: 8 or 16 bit

Dimmer: 8 or 16 bit

Movement

Rotating gobos

Framing shutters system

Thermal specification

Electrical specification and connections

Approvals

Mechanical specification

Rigging

Included items

Optional accessories

Legal

Related News

27.1.2021

Robe Lighting Show in Japan

Leading Japanese lighting designer Mr. Mitsumasa Hayashi created “The Robe Lighting Show” – a piece of light art at the Urayasu Mai Studio of the Nihon Stage Co.,Ltd. – which featured over 350 Robe moving lights. These were supplied by prominent Japanese rental companies, M-Tech Style and the Mula Corporation. The piece was commissioned by Mr. Masaharu Sakamoto who heads up LTG, Robe’s Japanese distributor.

Partner's websites:

We are proud sponsors of:

We are member of:

BMFL™ WashBeam EV

BMFL™ WashBeam EV

Gobos&Colours

Rotating Gobo Wheel 1

Rotating Gobo Wheel 1

Rotating Gobo Wheel 2

Rotating Gobo Wheel 2

Colour Wheel 1

Colour Wheel 1

Colour Wheel 2

Colour Wheel 2

Accessories

Technical Specification

Related News

Navigate

Log in

Follow Us

Stay in Touch

Navigate

Log in

Follow Us

Stay in Touch